You might consider this item: Randakk’s GL1000 Carb Rebuild Video
Recently, I’ve discovered some improperly sized jet needles that were provided with aftermarket carb rebuild kits. The needles looked identical to the original but did in fact have a significantly narrower cross section at the mid-point of the tapered section.
Effectively, this made the needles much richer. The brand in question is NAPCO and the kits were for a ’76 which happens to be one of my bikes. The result of these improper needles was the bike in question ran fine near sea level (although a plug check showed it was running slightly rich in the mid-range and the fuel mileage was terrible).