Need a replacement muffler for your Honda GL1000? Then you probably know already that this can be a vexing proposition!
Engine Rebuilding for GoldWings?
Unfortunately the economics of engine rebuilding are very poor on these engines. Here’s some advice if you think you need a rebuild.
Correct Rear End Tightening Sequence
This Tech Tip is provided courtesy of Ross Davis – noted early ‘Wing expert. Ross’s website is here.
Purpose:
Because the rear drive flange is mounted in a somewhat flexible fashion, this tightening sequence aligns this flange and keeps it from premature wear and unwanted friction. It also reduces unnecessary vibration and reduces rear brake squeal.
GL1100 Electrical and Timing Gremlins
You might consider this item: GL1100 Carburetor Repair Manual written by noted GL1100 guru Howard Halasz
This Tech Tip is provided courtesy of Howard Halasz – noted GL1100 Guru. Howard is a frequent contributor of technical columns and other information to GWRRA’s Wing World Magazine.
“A common failure with all GL1100s is the vacuum advance part of the pulse generator assembly. The units for the 1980 models use a higher advance angle than the unit for the 1981-1983 models.