Whenever I’m asked about “jetting” issues on vintage Honda carbs – here’s my strong advice:
Continue reading “Randakk’s Jetting Advice For Vintage Honda CV Carbs”
Carb Cleaning (in situ lazy method)
Fuel Filter Mounting Tips
Randakk’s High Performance Fuel Filters have many technical advantages and are super easy to install as demonstrated in this short video by by Shasta Smith – the Vintage Monkey.
More details on Randakk’s High Performance Fuel Filters here.
Replacing Throttle Shaft “Felts” on Honda GL1000, GL1100, GL1200, DOHC-4, CBX, CX500, etc.
Replacing Throttle Shaft “Felts” on GL1000, GL1100, GL1200, DOHC-4, CBX, CX500, etc.
Throttle Shaft Felt Replacement (photo courtesy Aaron Williams of Dude’s Garage)
More On Aftermarket Fuel Filters
Fuel filters are not included in Randakk Master Carb Kits. But, it would be a crime to redo your carbs and not take prudent measures to ensure a pure fuel supply! We recommend the OEM Honda filter as a high quality replacement unit for owners concerned about originality..
For others – we offer the Randakk High Performance Fuel Filter with sizes to fit virtually any carbureted motorcycle. Details here.
Typical EMGO Aftermarket Fuel Filter for Early ‘Wings…not available from Randakk.
Problems with Aftermarket Float Valves
I get lots of emails like this one:
“I purchased four “Napco Carb rebuild Kits” in addition to some parts from you like plenum seals, etc. I probably should have purchased your Master Kit. Anyway, 2 of the Napco float valves would not seat properly resulting in a lot of frustrating problems. With your recommendation, I cleaned and put the original Honda float valves back into the carbs. Problem Solved. Thanks!”Lee Korb – Raleigh, NC
Failed Aftermarket Float Valve
Photo courtesy Mike Nixon. All Rights Reserved
Honda GL1000 / GL1100 / GL1200 / CBX / DOHC-4 / CX500 & Variant Performance Parts
Build Sheet Details for Randakk’s Supercharged GL1000. Vintage Honda Performance!
This bike is now owned by a collector in Germany.
Randakk’s RC-003 Supercharged GL1000 …Current Incarnation
Continue reading “Honda GL1000 / GL1100 / GL1200 / CBX / DOHC-4 / CX500 & Variant Performance Parts”
Engine Rebuilding for GoldWings?
Unfortunately the economics of engine rebuilding are very poor on these engines. Here’s some advice if you think you need a rebuild.
Low Speed Wobble?
Diagram by Vittore Cossalter and Roberto Lot
I get this question frequently: “Do you know why if you let go of the handle bars under 30 mph my ‘Wing has a bad wobble?”
Early ‘Wings and most other bikes of this vintage don’t have any inherent wobble tendencies and they are rarely ridden at the “limit” where handling anomalies are magnified.
Honda GL1500 Accelerator Pump Details
This Tech Tip is provided courtesy of Howard Halasz – noted GL1500 Expert. Howard is a frequent contributor of technical columns and other information to GWRRA’s Wing World Magazine.